Keep in mind I believe it keeps as a default when you change that and you may have to go back and return it to whatever units you normally save in. stl file single select the file you want to open so it is highlighted and down at the bottom there is an Options button, click that and it opens a window, under Units there is an Import Units button, switch that to mm or in depending on how your file was saved out originally. Evan, What I did is when you go to open your. stl was open, I click on the part, then right click, select Convert to Base Feature, I selected output to solid, OK and it was done and worked correctly.Įvan, What I did is when you go to open your. stl came in fine and matched what the customer had. Status: This has been fixed with Version 1.0.14, of the Mesh Enabler for Inventor 2023.2. The Inventor Mesh Enabler leaves lots of large pieces of intersecting geometry sticking out from every direction. So it sees the 12 as the value and the import doesn't know or care what it is but as soon as I changed my import option to mm the. Products and versions covered Issue: Users reported that after installing the Inventor 2023.2 update, the Mesh Enabler addin no longer works. Can solid or surface be created from a hi poly count (5+ Million Tris) mesh when imported into Inventor The objective is to be able to export a. The customer exported in mm and I imported in inch. I opened a customer model and it looked correct until I made a measurement and it was 12' the real measurement was 0.473 or 12mm. stl file (inch or mm) when opening the file and change it in your options to match before opening it to keep it at the correct values. Make sure you know what your units are of the. This next comment doesn't really have anything to do with how the Mesh Enabler works other than how you import then use the Enabler: Seems to work fine now after Rocky fixed it up.

Inventor mesh enabler not working